tensile

英 [ˈtensaɪl]

美 [ˈtensl]

adj.  张力的; 拉力的; 抗张的; 可拉长的; 能伸长的; 可延展的

CET6TOEFLGREIELTSTEM8机械

BNC.24180 / COCA.24946

牛津词典

adj.

• 张力的；拉力的；抗张的
  used to describe the extent to which sth can stretch without breaking
  1. the tensile strength of rope
     绳索的抗拉强度
• 可拉长的；能伸长的；可延展的
  that can be drawn out or stretched
  1. tensile cable
     可伸延的电缆

柯林斯词典

• ADJ 可伸展的;可拉长的
  You usetensilewhen you are talking about the amount of stress that materials such as wire, rope, and concrete can take without breaking; a technical term in engineering.
  1. Certain materials can be manufactured with a high tensile strength.
     有些材料可以制造成抗拉强度大的产品。

英英释义

adj

• capable of being shaped or bent or drawn out
  1. ductile copper
  2. malleable metals such as gold
  3. they soaked the leather to made it pliable
  4. pliant molten glass
  5. made of highly tensile steel alloy
  Synonym:ductilemalleablepliableplianttractile
• of or relating to tension
  1. tensile stress
  2. tensile pull

双语例句

• Have good tensile strength and elongation hardness HB-160.
  有良好的抗拉强度和延伸率硬度HB-160。
• The product properties such as tensile strength and electric conductivity effected by cooling strength and deformation were studied.
  论述了正火（雾冷和强风冷却）和回火温度对凸轮轴中显微组织和力学性能的影响。
• It was found that the adhesive tensile and shear strength of the modified epoxy resin was increased.
  实验表明：预聚体的加入明显提高了环氧树脂的粘接剪切强度和拉伸强度。
• The anisotropy coefficients of the uniaxial compressive strength and tensile strength of numerical simulation results are0.72 and0.24, respectively.
  数值模拟结果得出单轴抗压强度和抗拉强度的各向异性系数分别为0.72和0.24；
• Tensile test, impact test have been carried out for the three alloys.
  对三种合金分别进行了拉伸、冲击试验和断口分析。
• The relationship between fracture toughness and notch toughness, tensile ductilities in lath martensite steel has been investigated.
  研究了超高强度板条马氏体钢的平面应变断裂韧性与缺口韧性、拉伸塑性之间的关系。
• The resistance of the nonwoven to tensile rupture is the sum of two resistances in parallel.
  非纺织物对拉伸断裂的阻力是两个并联阻力之和。
• The structure and tensile property of bast fiber of hibiscus was studied.
  本文还对纤维的形态结构和拉伸性能进行了分析。
• The tensile strength and the elongation percentage of the parent metal and the weld zone increased slightly.
  冲击处理使焊缝区和母材区的强度和伸长率均有所增加。
• Can a bending load makes both compressive and tensile stress in a member?
  弯曲载荷可以对一个物件同时产生压缩应力和张应力么？