meshing

英 [ˈmeʃɪŋ]

美 [ˈmeʃɪŋ]

v.  (使)吻合，相配，匹配，适合; 啮合
mesh的现在分词

COCA.41043

柯林斯词典

• N-VAR 网眼织物;网状物
  Meshis material like a net made from wire, thread, or plastic.
  1. The ground-floor windows are obscured by wire mesh.
     一楼的窗户装有防盗网。
  2. ...a mesh small enough to exclude tiny insects.
     网眼小得足以挡住小昆虫的网
• V-RECIP-ERG (使)相匹配;(使)相互协调;(使)吻合
  If two things or ideasmeshorare meshed, they go together well or fit together closely.
  1. Their senses of humor meshed perfectly...
     他们的幽默感配合得天衣无缝。
  2. This of course meshes with the economic philosophy of those on the right...
     这自然与右派的经济哲学相吻合。
  3. Meshing the research and marketing operations will be Mr. Furlaud's job.
     把研究与市场运作紧密结合起来将成为弗劳德先生的工作任务。

英英释义

noun

• the act of interlocking or meshing
  1. an interlocking of arms by the police held the crowd in check
  Synonym:meshinterlockinterlocking
• an open fabric of string or rope or wire woven together at regular intervals
  Synonym:netnetworkmeshmeshwork
• contact by fitting together
  1. the engagement of the clutch
  2. the meshing of gears
  Synonym:engagementmeshinterlocking

双语例句

• Friction Excitation Frequency Analysis during Gear Meshing and the Reducing Noise Characters Study of Lubrication
  齿轮啮合中的摩擦激励频率分析与润滑降噪特性研究
• An investigation on the meshing characteristics of face gear drives is made in this paper.
  本文对面齿轮传动的啮合特性进行了较系统、深入的研究。
• Gears using two gear teeth meshing with each other to transmit power and motion of the mechanical transmission, with the main, driven wheel gear direct, transmit motion and power of the device.
  齿轮传动装置利用两齿轮的轮齿相互啮合传递动力和运动的机械传动，用主、从动轮轮齿直接、传递运动和动力的装置。
• How do you see what you do meshing with, in particular, LeBron?
  你怎么看待你和你的队友之间磨合，尤其是勒布朗？
• Study on Optimization Design of Meshing Parameters and Transmission Error for Involute Harmonic Gear Transmission
  在迭代优化计算中考虑全部啮合参数对齿轮传动的影响。渐开线谐波齿轮传动啮合参数优化设计及传动误差分析
• The Optimization Design of Meshing Parameters for a Involute Harmonic Gear
  渐开线谐波齿轮啮合参数的优化设计
• After building the equations of tooth surfaces and the meshing model of a spherical gear pair, tooth contact analysis of spherical gear pairs is performed through simulation.
  在建立了球齿轮齿廓曲面方程和啮合模型基础上，利用计算机仿真的方法对其进行了齿面接触分析研究。
• To improve tooth strength and make tooth grinding implement for face gear, a new generating method of face gear drive has been proposed, and the meshing characteristics are investigated.
  为了提高面齿轮副的强度并解决其磨齿问题，提出了弧线齿面齿轮副的一种新的加工方法，并研究其啮合特性。
• It evaluated the maximum and minimum errors of tooth end shape meshing phases.
  评定了齿端廓形啮合相位的最大、最小误差。
• And then, meshing and setting boundary conditions are finished according to simulation need.
  然后根据模拟仿真的要求，划分网格和设置边界条件。