indentations

英 [ˌɪndɛnˈteɪʃənz]

美 [ɪnˌdɛnˈteɪʃənz]

n.  缺口; 凹陷; 凹痕; 行首缩进; 行首空格; 造成凹陷(或缺口); 将行首缩进
indentation的复数

柯林斯词典

• 行首缩格,行首留空格
  Anindentationis the space at the beginning of a line of writing when it starts further away from the edge of the paper than all the other lines.
• N-COUNT 凹口;缺口
  Anindentationis a shallow hole or cut in the surface or edge of something.
  1. Using a knife, make slight indentations around the edges of the pastry.
     用刀子绕馅饼边沿刻小锯齿。

双语例句

• Make sure the rectangular indentations on the synchroniser ring are positioned correctly with respect to the guide sleeve.
  务必确保同步器环上的矩形缺口相对于导套的位置正确。
• Using a nano-sized needle, they poked the cement samples, and measured the indentations using an atomic force microscope.
  他们利用纳米级的针头刺进水泥样品中，借助原子力显微镜测得内部空隙的形状。
• The results show that after the treatment, indentations and cracks appear in the surface of the silk fibers and fibrillar structure of the silk fibers becomes distinct.
  研究发现真丝纤维经低温氧等离子体处理后，表面形成微小凹坑和裂纹，纤维内部原纤构造明显。
• Marked by irregular projections and indentations on the edge or surface.
  平顺的没有破裂、凹痕，高低不平或其它参差状态的；平滑的。
• On Rock Fracture under static and Dynamic Indentations
  关于岩石的动静态侵入断裂
• If you opt for the northerly shore route from the entry area you'll find many caves and indentations as you explore the underwater terrain.
  你沿条线路潜游，即从入口潜向北岸，在观察水下地形时，你将看到许多大的空隙及缺口（海岸线凹入处）。
• Make four indentations into the condenser near the standard cone joint.
  在冷凝器接近标准圆锥接头处打四个穴孔。
• Study on the Measurement of Residual Stresses around Indentations inSiC/ Al_2O_3 Nanocomposite Using Fluorescence
  SiC/Al2O3纳米复合材料压痕残余应力压谱法测量研究
• PITTED: Small indentations appearing as black dots on finished surfaces of any piece of product; undesirable surface defects.
  麻面：在任何成品零件的表面上出现的小的黑色的麻点，这是不希望的缺陷。
• The varying distance between the microhardness indentations at the blanks of the cracks as a function of applied loads could be monitored to determine the crack opening displacements near the crack tip, which were used to obtain the crack opening load.
  通过测量裂尖后两岸显微硬度压痕随裂纹张开闭合的距离变化，建立了缺口根部角裂纹裂尖附近的裂纹张开位移和载荷的关系，以此确定裂纹的张开应力。